BLINDS AND FABRICS
SHEERS AND CURTAINS

CEILING INSTALLATION

STEP 1: MEASURE THE WIDTH
Measure the total width in inches of the wall to be covered and make no deductions.

STEP 2: MEASURE THE HEIGHT
Measure the total height from floor to ceiling in three different places and note the smallest measurement of the three.

Do not make any deductions; we will do it for you.

WALL INSTALLATION

STEP 1: MEASURE THE WIDTH
Measure the total width in inches of the wall to be covered and make no deductions.

STEP 2: MEASURE THE HEIGHT
Measure the desired height and provide this measurement. We will not make any deductions.

CHOICE OF WALL BRACKETS
We offer two sizes of wall brackets: 3 inches or 6 inches deep.

By default, you will receive 3-inch wall brackets, but if needed, please indicate "6-inch wall brackets" in the "notes" section at checkout.

INTERNAL CORNER MEASUREMENTS

For an internal corner installation, you must order two separate curtains.

STEP 1: MEASURE THE WIDTH
Deductions depend on the type of rail and installation:

Rail Moderne:
Ceiling or wall installation – Deduct 3 inches from each width measurement.

Rail Élégance / Prestige:
Ceiling installation – Deduct 3 inches from each width measurement.
Wall installation – Deduct 6 inches from each width measurement.

Rail Motorisée:
Ceiling or wall installation – Deduct 5 inches from each width measurement.

STEP 2: MEASURE THE HEIGHT
Measure the total height from floor to ceiling at three different points and note the smallest measurement.

Do not make any deductions; we will do them for you.

EXTERNAL CORNER MEASUREMENTS

For an external corner setup, you need to order two separate curtains.

STEP 1: MEASURE THE WIDTH
Additions based on the type of rail and installation method:

Modern Rail:

  • Ceiling or wall installation: Add 3 inches to each width measurement


Elegance / Prestige Rail:

  • Ceiling installation: Add 3 inches to each width measurement
  • Wall installation: Add 6 inches to each width measurement


Motorized Rail:

  • Ceiling or wall installation: Add 5 inches to each width measurement


STEP 2: MEASURE THE HEIGHT
Measure the total height from floor to ceiling at three different points and record the smallest measurement.

Do not make any deductions, we will take care of them for you.

MEASUREMENTS FOR BAY WINDOW

Consider the diagram and take measurements approximately 3 inches away from the windows to ensure that the roller shade cassettes do not touch.

STEP 1: MEASURE THE WIDTHS
Measure the different widths while carefully following the diagram.

STEP 2: MEASURE THE HEIGHTS
Measure the total height from the floor to the ceiling at three different points and note the smallest measurement.

Do not make any deductions; we will adjust them for you.

STEP 3: ORDER THE PANELS
Provide the exact measurements according to the diagram and your bay window.

MEASURING WITH MOLDINGS / CROWN MOLDINGS

For ceilings with crown molding, prioritize measuring using the WALL INSTALLATION method (see above) by measuring the height from the floor to the molding at three different points. Indicate the smallest measurement of the three.
FOIRE AUX QUESTIONS

FREQUENTLY ASKED QUESTIONS

RIPPLEFOLD:

To achieve beautiful waves, production will multiply the indicated width by 2.7 times the fabric. You do not need to add extra width—we will do it for you.

For example, as shown in the image below, if the wall to be covered measures 122 inches wide by 96 inches high, production will adjust the fabric width to be 2.7 times the width to be covered.

EURO PLEAT:

To achieve beautiful waves, production will multiply the indicated width by 2 times the fabric. You do not need to add extra width—we will do it for you.

FRENCH PLEAT:

To achieve beautiful waves, production will multiply the indicated width by 2 times the fabric. You do not need to add extra width—we will do it for you.

GROMMET:

To achieve beautiful waves, production will multiply the indicated width by 2 times the fabric. You do not need to add extra width—we will do it for you.

Premium Collection: Option to place two shades on the same cassette.

When entering the width and height measurements, you will have the option to select the desired number of panels. Then, you can simply specify the correct width for each panel.

Ceiling Installation: Do not make any deductions on the height; we will handle them for you. There will be a gap of approximately 1/4 inch between the floor and the curtain.

Wall Installation: Simply indicate the desired height from the rail, and we will not make any deductions.

Internal Corner Installation: Subtract 3 inches from the width of both perpendicular panels.

External Corner Installation: Add 3 inches to the width of both perpendicular panels.

The sheer curtains and drapes made of 100% polyester are machine washable in cold water on a delicate cycle. You can leave the hooks on the back of the curtain during washing. Simply hang them on the rail to dry. For sheer curtains and drapes made of linen, it is recommended to dry clean them. To remove wrinkles, you can use a steamer or iron on a low temperature.

MODERN RAIL
This white rail is very discreet. It can be installed on the wall or ceiling. For widths over 90 inches, the rail will be divided into 2-3 sections and connected discreetly with an appropriate connector.
Available for Ripplefold construction.

PRESTIGE RAIL
The prestige rail is defined by its refinement. It is available in 3 colors: matte black, brushed gold, and brushed stainless steel. This rail can be installed on the wall or ceiling. If the width is over 90 inches, the rail will be divided into 2-3 sections and connected discreetly with an appropriate connector.
Available for the following constructions:

  • Ripplefold
  • Euro Pleats
  • French Pleats

ELEGANCE RAIL
The elegance rail is a wall-mounted rail. It is available in matte black. Its refined wall supports give it the elegance it deserves. This rail can be paired with matte black eyelets or simply with carts inside the rail.
Available for the following constructions:

  • Ripplefold
  • Euro Pleats
  • French Pleats
  • Eyelets

MOTORIZED RAIL
The motorized rail, either rechargeable battery-powered or wired, will offer you the luxury of a 5-star hotel. This rail can be controlled via remote or WIFI with the purchase of a HUB.
For more details on the motorized rail, you can visit our motorization page.
Available for Ripplefold construction.

For widths greater than 90 inches, you will receive the rail subdivided into two or three equal pieces. These will be discreetly connected together using our connectors.

Additionally, the production will make a small deduction of about 1/4 inch from the rail to facilitate installation.

RIPPLEFOLD

  • CHOICE OF RAIL
  • CURTAINS OR SHEERS MADE FOR YOU
  • HARDWARE FOR INSTALLATION


EURO PLEATS / FRENCH PLEATS / EYELETS

  • CHOICE OF POLE
  • CURTAINS OR SHEERS MADE FOR YOU
  • HARDWARE FOR INSTALLATION