RIPPLEFOLD:

To achieve beautiful waves, production will multiply the indicated width by 2.7 times the fabric. You do not need to add extra width—we will do it for you.

For example, as shown in the image below, if the wall to be covered measures 122 inches wide by 96 inches high, production will adjust the fabric width to be 2.7 times the width to be covered.

EURO PLEAT:

To achieve beautiful waves, production will multiply the indicated width by 2 times the fabric. You do not need to add extra width—we will do it for you.

FRENCH PLEAT:

To achieve beautiful waves, production will multiply the indicated width by 2 times the fabric. You do not need to add extra width—we will do it for you.

GROMMET:

To achieve beautiful waves, production will multiply the indicated width by 2 times the fabric. You do not need to add extra width—we will do it for you.

Premium Collection: Option to place two shades on the same cassette.

When entering the width and height measurements, you will have the option to select the desired number of panels. Then, you can simply specify the correct width for each panel.

Ceiling Installation: Do not make any deductions on the height; we will handle them for you. There will be a gap of approximately 1/4 inch between the floor and the curtain.

Wall Installation: Simply indicate the desired height from the rail, and we will not make any deductions.

Internal Corner Installation: Subtract 3 inches from the width of both perpendicular panels.

External Corner Installation: Add 3 inches to the width of both perpendicular panels.

The sheer curtains and drapes made of 100% polyester are machine washable in cold water on a delicate cycle. You can leave the hooks on the back of the curtain during washing. Simply hang them on the rail to dry. For sheer curtains and drapes made of linen, it is recommended to dry clean them. To remove wrinkles, you can use a steamer or iron on a low temperature.

MODERN RAIL
This white rail is very discreet. It can be installed on the wall or ceiling. For widths over 90 inches, the rail will be divided into 2-3 sections and connected discreetly with an appropriate connector.
Available for Ripplefold construction.

PRESTIGE RAIL
The prestige rail is defined by its refinement. It is available in 3 colors: matte black, brushed gold, and brushed stainless steel. This rail can be installed on the wall or ceiling. If the width is over 90 inches, the rail will be divided into 2-3 sections and connected discreetly with an appropriate connector.
Available for the following constructions:

• Ripplefold
• Euro Pleats
• French Pleats

ELEGANCE RAIL
The elegance rail is a wall-mounted rail. It is available in matte black. Its refined wall supports give it the elegance it deserves. This rail can be paired with matte black eyelets or simply with carts inside the rail.
Available for the following constructions:

• Ripplefold
• Euro Pleats
• French Pleats
• Eyelets

MOTORIZED RAIL
The motorized rail, either rechargeable battery-powered or wired, will offer you the luxury of a 5-star hotel. This rail can be controlled via remote or WIFI with the purchase of a HUB.
For more details on the motorized rail, you can visit our motorization page.
Available for Ripplefold construction.

For widths greater than 90 inches, you will receive the rail subdivided into two or three equal pieces. These will be discreetly connected together using our connectors.

Additionally, the production will make a small deduction of about 1/4 inch from the rail to facilitate installation.

RIPPLEFOLD

• CHOICE OF RAIL
• CURTAINS OR SHEERS MADE FOR YOU
• HARDWARE FOR INSTALLATION

EURO PLEATS / FRENCH PLEATS / EYELETS

• CHOICE OF POLE
• CURTAINS OR SHEERS MADE FOR YOU
• HARDWARE FOR INSTALLATION